Causes of Slow Flushing Toilets
Discomfort Caused by a Slow Flushing Toilet
The stress and inconvenience of created by a slow flushing toilets can be quite disturbing and it can cause you great discomfort. The problem can be as a result of number of problems which are mostly technical. However, other problems leading to slow flushing toilets are based on the quality of the toilet systems.
The cost implications of a faulty toilet can be very costly and this calls for measures to avoid any instances of such an occurrence. With a faulty toilet, it will cost a lot money wise especially during the weekends when plumbing services are charged a bit higher than during the week days.
Problems Leading to Slow Flush Toilets
1. Weakness on the flasher pathways: for gallon flash toilets with an old manufacturing date, it could be the accumulation of impurities and deposits from hard water. This is the most common of the normal causes of a slow flushing toilet. The deposits clog along the water pathway reducing the pipe’s diameter and consequently causing the water to flow slowly.
To deal with this problem, all you need to do is to try and clean up the pipe using muriatic acid which helps in removing the sticky deposits on the inner surface of the pipes.
2. The flapper valve: the flapper valve has been set to respond in a definite and timely manner when the bowl has been emptied. It should not respond too fast nor should it be too slow. After a flush, the valve should stay up until at least 50% of the water has been drained.
If this is not the case, it will interfere with the pressure balance and eventually cause a mishap in the draining speed. At this point, the most important thing is to maintain the valve’s pressure the optimum so as to have a perfect draining force.
3. Broken bowl in the interior colon: the interior colon works through pressure differences and for it to push the water out for proper drainage, the colon has to be airtight from the inside.
When the inner colon has a crack, the pressure balance will be hampered and this can be the cause of slow flushing toilet. As such, one needs to immediately do something about it and this may involve calling a plumber to replace the broken colon or to have it mended. Without restoring the colons capability to maintain a perfect pressure, the problem cannot be resolved.
Your McAllen toilet issues can be a nuisance. Call All Valley Plumbing & A/C Co. at (956) 686-6656 today, and get your toilet working!